Apu is a Dell PowerEdge 2950 running Debian 4.0.

• 2 x Intel Xeon E5320
  • 4M L2 cache per processor
  • 4 cores per processor
  • Intel VT support
  • EMT64
• 16G Memory
• 4 x 73G SAS disk (RAID-5 as /dev/sda)
• 2 x 300G SAS disk (RAID-1 as /dev/sdb)

Outside networking is configured statically rather than through DHCP. The /etc/resolv.conf is custom. The DHCP client will overwrite this file if activated.

— Donour Sizemore 2008/04/24 17:34

• Getting Started With Your System

• Hardware Owner's Manual

• Information Update

• Installing Broadcom NetXtreme Drivers and TOE

• Microprocessor Installation Information

• Rack Installation Guide

• PERC 5/i RAID Controller User Guide

Apu is used as a V3VEE development machine. Following are the setup output files:

• GCC 3.4.6
  • Configure
  • Build
  • Install
• NASM 0.98.39
  • Configure
  • Build
  • Install

Dell PowerEdge 2950 running Fedora 7.

• Donour is using Apu for his research.

• 2 x Intel Xeon E5320
  • 4M L2 cache per processor
  • 4 cores per processor
  • Intel VT support
  • EMT64
• INFINICON, INFINISERV HCA card, 2 Port, SN: ICS0544X00062, PN: 900440-100-1
• 16G Memory
• 4 x 73G SAS disk

• Fedora Core 7
• OFED 1.2.0
• From uname -a:
  • Kernel Name: Linux
  • Node Name: apu
  • Kernel Release: 2.6.22.1-41.fc7
  • Kernel Version: #1 SMP Fri Jul 27 18:21:43 EDT 2007
  • Machine: x86_64
  • Processor: x86_64
  • Hardware Platform: x86_64
  • Operating System: GNU/Linux

These files were generated as a result of installing Fedora 7, and provide configuration information.

• The anaconda kick start file

• The installation log

• The installation syslog